What is IPv6?
IPv6 is the newer version of the Internet Protocol. Its addresses are 128 bits long, written in hex like 2001:db8:1:1::20, which gives so many that every device can have its own public address again, with no NAT.
It also cleans up the design: a fixed 40-byte header, no fragmentation by routers, multicast instead of broadcast, and devices that set up their own addresses from a router advertisement. A large share of traffic to big sites already uses IPv6, often without users noticing.
Think of it like this. If IPv4 is a street with house numbers that ran out, IPv6 gives every street a huge range of numbers. The router announces the street name (the prefix), and each house picks its own number on that street, then shouts once to check nobody else has it.
Step by step
Normal
5 stepsA laptop joins the network and builds its own global address from a router advertisement, with no DHCP server.
Normal
5 stepsA laptop joins the network and builds its own global address from a router advertisement, with no DHCP server.
- 1
Link-local address
fe80:: and a duplicate check
As soon as the cable connects, the laptop makes a link-local address starting with fe80::. Before using it, it asks: does anyone already have this? No answer means it is free.
- 2
Router solicitation
Any routers here?
The laptop sends a Router Solicitation to ff02::2, the group every router joins. It does not want to wait for the next regular advertisement.
- 3
Router advertisement
Prefix 2001:db8:1:1::/64
The router answers to all nodes with the network prefix, its own MAC address, the link MTU and a DNS server. The A flag means: build your own address from this prefix (SLAAC).
- 4
Global address
Prefix plus interface ID
The laptop joins the /64 prefix with a 64-bit interface ID it picked itself. Modern systems use a stable random-looking ID, not the MAC address, for privacy. It checks the new address for duplicates too.
- 5
Neighbour discovery
IPv6 has no ARP
To print, the laptop needs the printer's MAC address. It sends a Neighbor Solicitation to the printer's solicited-node group, and the printer answers with a Neighbor Advertisement. This replaces ARP and uses multicast instead of broadcast.
Duplicate address
3 stepsSomeone types an address that the printer already uses. Duplicate address detection catches it before any harm.
Duplicate address
3 stepsSomeone types an address that the printer already uses. Duplicate address detection catches it before any harm.
- 1
Address typed by hand
2001:db8:1:1::20 again
Daniel sets up a new file server and types a fixed address. By mistake it is the printer's address.
- 2
Check first
Neighbor Solicitation from ::
Before using any address, even a typed one, an IPv6 device sends a Neighbor Solicitation for it from the unspecified address ::.
- 3
The printer objects
That address is mine
The printer answers with a Neighbor Advertisement to all nodes. The file server marks the address as duplicate and does not use it. Nobody's traffic goes to the wrong place.
Packet too big
3 stepsIPv6 routers never split packets. A smaller link sends back Packet Too Big, and the sender shrinks its packets.
Packet too big
3 stepsIPv6 routers never split packets. A smaller link sends back Packet Too Big, and the sender shrinks its packets.
- 1
Full-size packet
1500 bytes from the server
The server sends a full 1500-byte packet. On the way is a tunnel whose extra header leaves room for only 1480 bytes.
- 2
Packet Too Big
ICMPv6 type 2, MTU 1480
An IPv6 router never fragments. It drops the packet and tells the sender the size that fits. Only the original sender may split packets in IPv6.
- 3
Smaller packets
Sent again at 1480
The server remembers the smaller path MTU and resends. This is why blocking ICMPv6 breaks IPv6: big packets would vanish with no explanation.
Myths and mix-ups
- IPv6 does not need NAT to be safe; a stateful firewall blocks unwanted inbound traffic just as well.
- IPv6 addresses are not always built from the MAC address; modern systems use random-looking or stable private IDs.
- IPv6 has no ARP; neighbour discovery over ICMPv6 does that job.
- You cannot safely block all ICMPv6; neighbour discovery and Packet Too Big depend on it.
- IPv6 is not a faster IPv4; speed depends on the path, not the version.
Try it yourself
Run these on your own computer to see IPv6 at work.
See your IPv6 addresses (Windows)
ipconfigLook for IPv6 Address, Temporary IPv6 Address and Link-local IPv6 Address (fe80::).
See your IPv6 addresses (macOS)
ifconfig en0 inet6Lines with autoconf come from SLAAC; secured and temporary mark privacy addresses.
See your IPv6 addresses (Linux)
ip -6 addrscope global is reachable from the internet; scope link is fe80:: and stays on your network.
See your IPv6 neighbours
ip -6 neighLinux. On Windows use netsh interface ipv6 show neighbors; on macOS use ndp -an.
Ping over IPv6
ping -6 example.comWindows and Linux. On macOS use ping6 example.com. No reply may mean your network has no IPv6.
IPv6 at a glance
- Layer
- Network (3)
- Address size
- 128 bits
- Header size
- 40 bytes fixed, plus optional extension headers
- Ethernet type
- 0x86DD
- Minimum link MTU
- 1280 bytes
- Address setup
- SLAAC from router advertisements, or DHCPv6
- Defined in
- RFC 8200 (first in 1995)
Defined inRFC 8200RFC 4291RFC 4861RFC 4862RFC 4443RFC 8981
Header fields
What IPv6 puts in its messages, with example values from the stories above.
IPv6
- Version
6- Traffic class
0x00- Flow label
0x00000- Payload length
24 bytesOnly what follows the header. The header itself is always 40 bytes.- Next header
58 (ICMPv6)What comes next: 58 is ICMPv6, 6 is TCP, 17 is UDP.- Hop limit
255255 proves the message came from this link: a router would have lowered it.- Source
::The unspecified address: the device has no address it may use yet.- Destination
ff02::1:ff0e:9d17The solicited-node group. Only devices whose address ends the same way listen.
ICMPv6
- Type
135 (Neighbor Solicitation)- Code
0- Checksum
verified- Target address
fe80::8f3a:21c4:6b0e:9d17The address being checked. If anyone already has it, they will answer.- Source link-layer address
a4:91:b1:00:00:01The router's MAC, so the laptop does not need to ask for it.- Cur hop limit
64- Flags
M=0, O=0M=0 means no DHCPv6 needed for addresses. O=0 means no extra DHCPv6 settings.- Router lifetime
1800 secondsHow long to use this router as default gateway without a new advertisement.- Prefix information
2001:db8:1:1::/64, A=1, L=1, valid 86400 s, preferred 14400 sA=1 is the SLAAC switch: devices may build their own addresses from this prefix.- MTU
1480The largest packet the next link can carry.
Test yourself
How long is an IPv6 address?
Questions people ask
What is the difference between IPv4 and IPv6?
IPv4 uses 32-bit addresses and is nearly out of them. IPv6 uses 128-bit addresses, has a simpler fixed header, lets devices set up their own addresses, and replaces ARP and broadcast with neighbour discovery and multicast.
What is SLAAC?
Stateless address autoconfiguration. The router advertises a /64 prefix, and each device builds its own address from that prefix plus an interface ID, then checks it is not already in use. No DHCP server needed.
What is an fe80 address?
A link-local IPv6 address. Every IPv6 interface has one. It works only on the local network and is used for neighbour discovery and talking to the router.
Does IPv6 need NAT?
No. There are enough addresses for every device to have a public one. Your router's firewall still blocks unwanted connections from outside.
How do I know if I have IPv6?
Run ipconfig, ifconfig or ip -6 addr and look for an address that does not start with fe80. If you have one, try ping -6 example.com.