TodayTools

Internet Control Message Protocol

How ICMP works

Ping, traceroute and error notes

Donate
L3NetworkIP
What brings you here?

Watch it happen

How much detail

ping sends an echo request; the server echoes it back, and the time it took is your round-trip time.

Your laptop
Home router
ISP router
Core router
Web server
Wi-FiInternetCableRequestResponse

3 steps, 4 packets

First up: Echo request. Press Play to watch it happen, one step at a time.

0 of 30/3

What is ICMP?

ICMP is how the network talks about itself. Routers and hosts use it to send short notes back to a sender: this host is unreachable, this packet ran out of hops, this packet is too big. It rides directly inside IP and has no ports.

Two everyday tools are built on it. ping sends Echo requests and times the replies. traceroute uses Time exceeded notes to map every router on the path. IPv6 leans on ICMPv6 even more, for finding neighbours and routers.

Think of it like this. ICMP is the returned-mail notice of the internet. If a letter cannot be delivered, the post office sends a short note back saying why: no such address, or the letter was too big. Ping is like knocking on a door and waiting to hear someone knock back.

Step by step

Ping

3 steps

ping sends an echo request; the server echoes it back, and the time it took is your round-trip time.

  1. 1

    Echo request

    Type 8, sequence 1

    ping builds an ICMP Echo request with an identifier and a sequence number, plus 56 bytes of filler. It notes the time it sent it.

  2. 2

    Echo reply

    Type 0, the same data back

    The server's operating system answers by itself; no app is needed. The laptop matches the reply by identifier and sequence number and prints the time: about 36 ms here.

  3. 3

    Repeat

    One per second

    ping keeps going, once a second on most systems. Missing sequence numbers show packet loss, and changing times show jitter.

Traceroute

4 steps

Probes with TTL 1, 2, 3 make each router on the path reply in turn, revealing the route hop by hop.

  1. 1

    Hop 1

    TTL 1

    traceroute sends a probe with TTL 1. The first router lowers it to 0, drops it and sends back Time exceeded. Its address is hop 1.

  2. 2

    Hop 2

    TTL 2

    The next probe has TTL 2, so it dies one router further. Each hop is usually probed three times to show the time spread.

  3. 3

    Hop 3

    TTL 3

    The core router reports in the same way. A hop that shows * * * just did not reply, which many routers are set to do. It does not mean the path is broken.

  4. 4

    Destination

    Echo reply ends it

    With TTL 4 the probe reaches the server, which answers with an Echo reply instead. traceroute stops. Windows tracert always uses ICMP Echo; traceroute on macOS and Linux sends UDP by default, and -I switches to ICMP.

Host unreachable

3 steps

The last router cannot find the machine on its network, so it sends Destination unreachable back.

  1. 1

    Ping a machine that is off

    203.0.113.99

    The packet crosses the internet fine, because the network 203.0.113.0/24 exists and is reachable.

  2. 2

    Last hop fails

    ARP gets no answer

    The core router is directly connected to that network, so it asks for the machine's MAC address with ARP. Nobody answers.

  3. 3

    Destination unreachable

    Type 3, code 1

    After a few seconds the router gives up and sends ICMP Destination unreachable, Host unreachable, to the sender. Windows ping shows: Reply from 192.0.2.1: Destination host unreachable. Code 0 would mean the whole network is unreachable; code 3 means the port is closed.

Ping blocked

3 steps

A firewall silently drops pings. ping says request timed out, yet the website works fine.

  1. 1

    Ping sent

    Echo requests leave

    The laptop pings the server as usual.

  2. 2

    Silence

    Dropped by a firewall

    The server's firewall is set to drop ICMP Echo requests without a word. ping waits about a second for each, then prints Request timed out.

  3. 3

    Yet the site is up

    TCP 443 still answers

    A TCP connection to port 443 gets its SYN-ACK at once. A failed ping only means pings are blocked, not that the server is down.

Myths and mix-ups

  • A failed ping does not mean a server is down; many servers and firewalls drop pings on purpose.
  • Blocking all ICMP is not good security; it breaks path MTU discovery and makes problems harder to find.
  • ICMP does not use ports; a ping to port 80 is not a thing.
  • Stars (* * *) in traceroute do not mean the path is broken; that router just did not answer the probe.

Try it yourself

Run these on your own computer to see ICMP at work.

  • Ping four times (Windows)

    ping example.com

    Windows sends four by default. Look at time= and the loss percentage.

  • Ping four times (macOS or Linux)

    ping -c 4 example.com

    Without -c it runs until you press Ctrl+C.

  • Trace the path (Windows)

    tracert example.com

    Each line is one router, probed three times with ICMP Echo.

  • Trace the path (macOS or Linux)

    traceroute example.com

    Sends UDP probes by default. Add -I for ICMP (may need sudo on Linux).

  • Watch ICMP live (macOS or Linux)

    sudo tcpdump -n icmp

    Run ping in another terminal to see each request and reply.

ICMP at a glance

Layer
Network (3), carried inside IP
IP protocol number
1 (ICMPv6 is 58)
Ports
None
Common types
0 Echo reply, 3 Unreachable, 8 Echo request, 11 Time exceeded
Header
8 bytes: type, code, checksum, then type-specific fields
Defined in
RFC 792 (1981); ICMPv6 in RFC 4443

Defined inRFC 792RFC 4443RFC 1191RFC 1812

Header fields

What ICMP puts in its messages, with example values from the stories above.

ICMP

Type
8 (Echo request)8 asks: are you there? Please echo this back.
Code
0
Checksum
verified
Identifier
0x1a2bPicked by the ping program, so replies reach the right window.
Sequence number
1Goes up by one each ping, so you can spot a missing reply.
Data
56 bytesFiller that the target copies back unchanged.
Original packet
IPv4 header + 8 bytes of the probe with TTL 1Lets traceroute match this note to the probe it sent.

Test yourself

Question 1 of 5Score 0

Which ICMP type is an Echo request?

Questions people ask

What is ICMP used for?

Sending error and status notes about IP delivery, such as host unreachable, time exceeded and packet too big. The ping and traceroute tools are built on it.

Why does ping say request timed out?

No reply came back within about a second. The host may be down, but often a firewall simply drops pings, or a reply was lost on a busy link.

What does TTL mean in ping results?

The time to live left on the reply when it arrived. Hosts usually start at 64 or 128 and each router lowers it by one, so it hints at how many hops away the host is.

Should I block ICMP on my firewall?

Not all of it. Blocking Echo requests from outside is common, but Destination unreachable, Time exceeded and Packet Too Big are needed for the network to work properly.

What is the difference between ping and traceroute?

ping tests whether one host answers and how fast. traceroute shows every router on the way to it and the time to each one.

Donate