TodayTools

Dynamic Host Configuration Protocol

How DHCP works

Hands your device an address when it joins

Donate
L7ApplicationPort 67, 68UDP
What brings you here?

Watch it happen

How much detail

Your laptop joins the home Wi-Fi with no address and gets one in four packets: Discover, Offer, Request, Ack.

Your laptop
Wi-Fi
Home router (DHCP server)
Mateo's phone
Internet
Wi-FiCableInternetLookupResponseRequestControl

5 steps, 5 packets

First up: Discover. Press Play to watch it happen, one step at a time.

0 of 50/5

What is DHCP?

DHCP is what happens in the second after you join a Wi-Fi network. Your device arrives with no IP address, asks loudly whether anyone can give it one, and a DHCP server, usually your router, hands over an address plus the gateway and DNS server to use.

Addresses are lent, not given. Each one comes with a lease, and the device renews it while it stays on the network. When it leaves, the address goes back into the pool for the next phone or laptop. Without DHCP, every device would need its address typed in by hand.

Think of it like this. It is like checking in at a hotel. You walk in with no room, ask the front desk, get offered room 23, say yes, and get a key card that works until checkout. If you want to stay longer, you ask to extend before the card stops working.

Step by step

Joining (DORA)

5 steps

Your laptop joins the home Wi-Fi with no address and gets one in four packets: Discover, Offer, Request, Ack.

  1. 1

    Discover

    Is there a DHCP server here?

    The laptop has no IP address, so it cannot talk to anyone directly. It broadcasts a Discover from 0.0.0.0 to 255.255.255.255, port 67, and every device on the network hears it.

  2. 2

    Offer

    You can have 192.168.1.23

    The router's DHCP server picks a free address from its pool and offers it, along with the mask, the gateway and the DNS server.

  3. 3

    Request

    Yes, I will take it

    The laptop broadcasts a Request naming the offered address and the server it chose. Broadcasting it tells any other DHCP server that its own offer was not taken.

  4. 4

    Ack

    It is yours for a day

    The server confirms with an Ack and the lease times. The laptop now has an address, a gateway and a DNS server.

  5. 5

    Check for clashes

    Is anyone already using it?

    Before using the address, the laptop sends ARP probes asking who has 192.168.1.23. If nobody answers, it is safe to use.

Lease renewal

2 steps

Twelve hours later the lease is half used, so the laptop asks the router directly to extend it.

  1. 1

    T1 reached

    Half the lease has passed

    At T1, 12 hours into a one-day lease, the laptop sends a Request straight to the server that gave the address. No broadcast is needed: it already has an address and knows the server.

  2. 2

    Ack

    Another full day

    The server answers with an Ack and a fresh 24-hour lease. Nothing changes for the laptop; open connections carry on. If the server stayed silent, the laptop would keep trying and broadcast at T2.

No server

4 steps

The router is switched off. Nobody answers the Discover, and the laptop gives itself a 169.254 address.

  1. 1

    Discover, no reply

    Silence

    The laptop broadcasts a Discover. The router that runs DHCP is off, so nobody answers.

  2. 2

    Try again, longer gaps

    About 4, 8, then 16 seconds

    DHCP clients resend with growing gaps, roughly doubling each time. The Seconds field grows to show how long the client has been trying.

  3. 3

    Self-assigned address

    169.254.x.x

    After about a minute the laptop picks a random link-local address in 169.254.0.0/16, checks nobody uses it with ARP, and takes it. Windows calls this APIPA.

  4. 4

    Local only

    No gateway, no internet

    With a 169.254 address the laptop can reach other self-assigned devices on the same cable, but not the internet. Seeing 169.254 in ipconfig almost always means DHCP failed.

Myths and mix-ups

  • DHCP does not only give an IP address: it also sets the gateway, DNS servers, subnet mask and more.
  • A 169.254 address is not a working network address; it means no DHCP server answered.
  • Your device does not wait until the lease runs out to renew; it starts at half time.
  • Turning the router off and on does not always give you a new address, because the server remembers devices by their MAC address.

Try it yourself

Run these on your own computer to see DHCP at work.

  • See your lease (Windows)

    ipconfig /all

    Look for DHCP Server, Lease Obtained and Lease Expires under your Wi-Fi adapter.

  • Ask for a fresh lease (Windows)

    ipconfig /release && ipconfig /renew

    Drops the address and runs DORA again. Your connection blips for a second.

  • See the last DHCP packet (macOS)

    ipconfig getpacket en0

    Shows the server, lease time and every option. Use en1 if en0 is not your Wi-Fi.

  • See DHCP options (Linux)

    nmcli -f DHCP4 device show wlan0

    Replace wlan0 with your interface name from nmcli device.

DHCP at a glance

Layer
Application (7)
Ports
UDP 67 (server) and 68 (client)
Four steps
Discover, Offer, Request, Ack (DORA)
Typical home lease
1 day, renewed at half time
Fallback address
169.254.x.x when no server answers
Built on
BOOTP (1985)
Defined
1997 (RFC 2131 and RFC 2132)
IPv6 version
DHCPv6 on ports 546 and 547

Defined inRFC 2131RFC 2132RFC 3927

Header fields

What DHCP puts in its messages, with example values from the stories above.

DHCP

Message type
Boot Request (1)
Transaction ID
0x6a3f9c21A random number picked by the client. Every reply in this conversation carries the same one.
Seconds elapsed
0
Flags
0x0000 (Unicast)
Client IP (ciaddr)
0.0.0.0
Your IP (yiaddr)
192.168.1.23The address the server is handing to the client.
Client MAC
3c:22:fb:1a:2b:3cHow the server recognises this device, so it can give it the same address next time.
Option 53: DHCP message type
Discover (1)
Option 61: Client identifier
01:3c:22:fb:1a:2b:3c
Option 12: Host name
ravi-laptopLets the router show a friendly name in its device list.

Test yourself

Question 1 of 5Score 0

What are the four DHCP messages, in order?

Questions people ask

What is DHCP and how does it work?

DHCP gives devices an IP address automatically when they join a network. The device broadcasts a Discover, the server offers an address, the device requests it and the server confirms with an Ack.

Why do I have a 169.254 IP address?

Your device did not hear back from a DHCP server, so it gave itself a link-local address. Check the cable or Wi-Fi, restart the router, then run ipconfig /renew.

What is a DHCP lease time?

How long a device may keep its address. Home routers often use one day. The device renews at half the lease, so it rarely changes while you use it.

What is the difference between a static IP and DHCP?

A static IP is typed in by hand and never changes. DHCP lends addresses automatically. Routers can also reserve the same DHCP address for one device, which gives you the best of both.

Which port does DHCP use?

UDP port 67 on the server and UDP port 68 on the client. DHCPv6 uses 547 and 546.

Donate