TodayTools

Wi-Fi Protected Access 3

How WPA3 works

Safer Wi-Fi passwords that resist guessing

Donate
L2Data linkLink
What brings you here?

Watch it happen

How much detail

A phone joins WPA3-Personal: SAE commit and confirm, association, then the 4-way handshake.

Omar's phone
WPA3 Wi-Fi
Router
Wi-FiCableControlSetupRequestResponseDataEncrypted

5 steps, 12 packets

First up: Find the network. Press Play to watch it happen, one step at a time.

0 of 50/5

What is WPA3?

WPA3 is the Wi-Fi Alliance's security program from 2018. Its Personal mode replaces the WPA2 password check with SAE (Simultaneous Authentication of Equals), a password exchange based on the Dragonfly method, before the usual 4-way handshake.

The big win: someone who records you joining cannot take that recording home and guess your password at full speed. Every join makes a fresh key, old recordings stay safe even if the password leaks later, and management frames such as disconnect messages are protected.

Think of it like this. WPA2 is like a lock where a thief can photograph the keyhole and try a million keys at home. WPA3 is a lock that only reveals whether a key fits when you try it at the door, one key at a time, with the doorman watching.

Step by step

Normal

5 steps

A phone joins WPA3-Personal: SAE commit and confirm, association, then the 4-way handshake.

  1. 1

    Find the network

    Beacon says WPA3

    The beacon lists AKM 8 (SAE) and says management frame protection is required. The phone knows it must use SAE.

  2. 2

    SAE Commit

    Both sides send a scalar and an element

    Each side turns the password into a point on an elliptic curve, picks a random secret and sends values built from both. This is the Dragonfly exchange, also used in IEEE 802.11 mesh.

  3. 3

    SAE Confirm

    Proof of the same secret

    Each side computes a shared secret and sends a hash of it. If both hashes check out, both know the password, and they share a fresh master key.

  4. 4

    Association

    Join with AKM 8

    The phone associates as usual, naming SAE and protected management frames in its request.

  5. 5

    4-way handshake

    Session keys from the SAE key

    The same EAPOL handshake as WPA2 runs, but its master key came from SAE, so it changes every join. Then all data is encrypted.

Offline guessing

4 steps

An attacker records the join and tries to guess the password at home. It works on WPA2 recordings, not on SAE.

  1. 1

    Recording the air

    The attacker captures a join

    Anyone in range can record the frames when a phone joins. With WPA2, messages 1 and 2 of the handshake are enough to start guessing.

  2. 2

    Why WPA2 falls

    Each guess can be checked at home

    With WPA2, the attacker tries a password, computes the key and checks the MIC from message 2. A graphics card tries hundreds of thousands of guesses a second, never touching the network again. Short passwords fall.

  3. 3

    Why SAE holds

    The recording gives no way to test guesses

    The SAE commit values mix the password with secret random numbers the attacker never sees. There is no value to check a guess against without solving a hard math problem, so offline guessing does not work.

  4. 4

    Online only

    One guess per full exchange

    The only way left is to run SAE with the real access point, one guess at a time. Each wrong guess fails at Confirm, and the access point can slow down floods of attempts with anti-clogging tokens.

Downgrade blocked

3 steps

A fake access point copies the network name but offers only WPA2. A phone that remembers WPA3 refuses it.

  1. 1

    Transition mode

    WPA2 and WPA3 on one name

    Many routers run WPA3 transition mode so older laptops can still join with WPA2. That is handy, but it gives attackers a weaker door to try.

  2. 2

    Fake twin

    Same name, WPA2 only

    An attacker sets up an access point with the same SSID that offers only WPA2. If a phone joined it, the attacker could capture a WPA2 handshake and guess offline.

  3. 3

    Phone says no

    Transition disable

    When the phone last joined the real network, message 3 carried a Transition Disable note. The phone now insists on SAE for this network, ignores the fake and joins the real access point.

Myths and mix-ups

  • WPA3 does not make a weak password strong; it stops offline guessing, but someone can still try common passwords live.
  • WPA3 does not send your password over the air any more than WPA2 did; neither one does.
  • WPA3 is not a new radio standard; it works on Wi-Fi 4, 5, 6 and 7 hardware that has the software for it.
  • Transition mode is not full WPA3; old devices still use WPA2 on the same network.

Try it yourself

Run these on your own computer to see WPA3 at work.

  • Your security type (Windows)

    netsh wlan show interfaces

    The Authentication line says WPA3-Personal or WPA2-Personal.

  • Networks and security (Linux)

    nmcli -f SSID,SECURITY dev wifi

    SECURITY shows WPA3 for SAE networks and WPA2 WPA3 for transition mode.

  • Your security type (macOS)

    sudo wdutil info

    Look at the Security line. The old airport command was removed in recent macOS.

  • Router setting

    Router admin page, Wi-Fi security: WPA3-Personal

    Choose WPA3 only if all your devices support it, otherwise WPA2/WPA3 mixed mode.

WPA3 at a glance

Layer
Data link (2)
Released
2018 by the Wi-Fi Alliance
Personal mode
SAE, AKM 8 (802.11 Authentication algorithm 3)
Usual group
19 (NIST P-256 elliptic curve)
Encryption
AES-CCMP, or GCMP-256 in 192-bit Enterprise
Required extra
Protected management frames (802.11w)
Required on
Wi-Fi 6E and Wi-Fi 7 certified devices on 6 GHz
Defined in
WPA3 Specification, SAE in IEEE 802.11

Defined inWPA3 Specification (Wi-Fi Alliance)IEEE 802.11-2020 (SAE)RFC 7664 (Dragonfly)IEEE 802.11w

Header fields

What WPA3 puts in its messages, with example values from the stories above.

IEEE 802.11

Frame type
Beacon
Receiver address
ff:ff:ff:ff:ff:ff
Transmitter address
a4:91:b1:7c:00:30
BSSID
a4:91:b1:7c:00:30
Protected
1

Beacon

SSID
Omar-Home
RSN element
AKM 8 (SAE), CCMP, PMF requiredAKM 8 means WPA3-Personal. PMF required means management frames such as disconnects are protected too.
RSN extension
SAE hash-to-element supported

SAE Commit

Algorithm
3 (SAE)SAE replaces the empty open authentication of WPA2 with a real password exchange.
Sequence
1 (Commit)
Status
126 (SAE hash-to-element)Says the password element was made with the newer hash-to-element method, which closes the 2019 timing leaks.
Group
19 (NIST P-256 curve)
Scalar
3f0a...91c2 (32 bytes)A number built from a fresh secret random value. It reveals nothing about the password.
Element
point on the curve (64 bytes)A point mixed with the password element. Without solving a hard math problem, nobody can pull the password out of it.

Test yourself

Question 1 of 5Score 0

What does SAE replace in the WPA2 join?

Questions people ask

What is the difference between WPA2 and WPA3?

Both use AES encryption. WPA3-Personal adds SAE, which blocks offline password guessing and gives each session a fresh key, and it requires protected management frames.

Should I turn on WPA3 on my router?

Yes, if your devices support it. If some older devices do not, use WPA2/WPA3 mixed (transition) mode so they can still join.

Why can't my old device connect to WPA3 Wi-Fi?

Devices need software support for SAE and protected management frames. Many from before 2019 never got it. Transition mode lets them join with WPA2.

Can WPA3 be hacked?

In 2019 researchers found side-channel flaws called Dragonblood in early SAE code. Fixes and the newer hash-to-element method closed them. A guessable password can still be tried live, one attempt at a time.

Is WPA3 required for 6 GHz Wi-Fi?

Yes. Wi-Fi 6E and Wi-Fi 7 devices must use WPA3 or Enhanced Open on the 6 GHz band; WPA2 is not allowed there.

Donate