TodayTools

Server Message Block

How SMB works

Shared folders on Windows networks

Donate
L7ApplicationPort 445TCP
What brings you here?

Watch it happen

How much detail

Arjun opens a spreadsheet from the office shared folder: a Kerberos ticket, then negotiate, log in, connect to the share and read the file.

Arjun's PC
Office switch
files.example.com
Domain controller
CableLookupSetupRequestResponseDataClose

5 steps, 16 packets

First up: Get a ticket. Press Play to watch it happen, one step at a time.

0 of 50/5

What is SMB?

SMB is what you use when you open a shared folder like \\server\Shared in File Explorer, save to a home NAS or print to an office printer. It lets a computer open, read, write and lock files on another machine as if they were on its own disk.

Windows, macOS and Linux (through Samba) all speak it. Modern SMB 3 signs every message and can encrypt whole shares, while the old SMB1 is switched off because it is unsafe. It is built for local networks, so port 445 should never be open to the internet.

Think of it like this. SMB is like a library with a front desk. You show your card (session setup), ask for a room (tree connect to a share), then borrow a book, read pages and hand it back (create, read, close). The desk keeps track of who has which book so two people do not scribble on the same page at once.

Step by step

Normal

5 steps

Arjun opens a spreadsheet from the office shared folder: a Kerberos ticket, then negotiate, log in, connect to the share and read the file.

  1. 1

    Get a ticket

    Kerberos from the domain controller

    In an office domain the PC asks the domain controller for a Kerberos ticket for the file server. Arjun does not type anything, because he signed in to Windows this morning.

  2. 2

    Negotiate

    Pick the SMB version

    The PC lists the SMB dialects it knows and the server chooses the highest shared one, here 3.1.1. They also agree on signing and encryption methods.

  3. 3

    Session setup

    Log in with the ticket

    The PC sends the ticket inside SESSION_SETUP. The server checks it and creates a session. At home without a domain, the same step uses NTLM and a password.

  4. 4

    Tree connect

    Open the share

    TREE_CONNECT names the share, \\files.example.com\Shared. The server checks Arjun may use it and returns a tree id.

  5. 5

    Open, read, close

    CREATE, READ, CLOSE

    CREATE opens the file (it is also used for files that already exist). READ asks for bytes at an offset. CLOSE lets go of the file.

SMB 3 encryption

4 steps

The HR share is set to encrypt data, so salary files cross the network as AES-GCM ciphertext.

  1. 1

    Negotiate ciphers

    AES-256-GCM first

    In SMB 3.1.1 the PC offers a list of ciphers and the server chooses one. Here both prefer AES-256-GCM.

  2. 2

    Log in

    Kerberos as before

    The session setup works the same way. Session keys for signing and encryption come out of this login.

  3. 3

    HR share demands encryption

    Share flag ENCRYPT_DATA

    The admin set this share to require encryption. The TREE_CONNECT reply says so, and from then on every message for it is wrapped in a transform header.

  4. 4

    Read, unreadable to others

    Encrypted SMB3

    Someone capturing traffic on the switch sees the file name and data only as random bytes. Without encryption SMB data is signed but readable.

SMB1 refused

3 steps

An old scanner tries to save a scan with SMB1, and the modern file server refuses to talk.

  1. 1

    Scan to folder

    The scanner speaks only SMB1

    Arjun scans a contract to the shared folder. The scanner's firmware is from 2012 and only offers the old SMB1 dialect, NT LM 0.12.

  2. 2

    Refused

    The server drops the connection

    SMB1 is off on current Windows by default. A server without SMB1 cannot answer this negotiate, so it closes the connection and the scanner shows a network error.

  3. 3

    Why SMB1 is gone

    Unsafe, and once used by a worm

    SMB1 has no modern signing or encryption, and a flaw in it let the WannaCry ransomware spread across networks in 2017. The fix is a firmware update with SMB2 or 3, or a scan-to-email setting, not turning SMB1 back on.

Wrong password

3 steps

At home there is no domain, so Windows logs in to the NAS with NTLM, and a typo gets STATUS_LOGON_FAILURE.

  1. 1

    Negotiate

    Same as in the office

    Daniel types \\192.168.1.50\Photos. The laptop and NAS agree on an SMB 3 dialect.

  2. 2

    NTLM challenge

    Three messages

    Without a domain there is no Kerberos. NTLM has the server send a random challenge, and the laptop answers with a value worked out from the password. The password itself is not sent.

  3. 3

    Logon failure

    0xC000006D

    The answer does not match, so the NAS replies STATUS_LOGON_FAILURE. Windows shows The user name or password is incorrect and asks again.

Myths and mix-ups

  • SMB is not only for Windows; macOS, Linux, phones and most NAS boxes speak it.
  • Turning SMB1 back on is not a safe fix for an old device; update the device or use another way to send files.
  • SMB 3 is not always encrypted; signing is common, but encryption must be enabled per share or for the server.
  • Opening port 445 to the internet is never a good way to share files; use a VPN instead.

Try it yourself

Run these on your own computer to see SMB at work.

  • See your SMB connections and versions (Windows)

    Get-SmbConnection

    Run in PowerShell while a share is open. The Dialect column shows 3.1.1 on modern systems.

  • Map a share to a drive letter (Windows)

    net use Z: \\files.example.com\Shared /user:EXAMPLE\arjun

    Replace the server, share and user with your own. net use /delete Z: removes it.

  • List shares on a server (Linux, macOS with Samba)

    smbclient -L //files.example.com -U arjun

    Asks for the password, then lists the shares.

  • Is SMB1 still on? (Windows, as admin)

    Get-SmbServerConfiguration | Select EnableSMB1Protocol

    False is what you want.

SMB at a glance

Layer
Application (7)
Port
445 over TCP; 139 for old NetBIOS setups
Transport
TCP; newer Windows Server can also use QUIC on 443
Versions
SMB1 (retired), SMB 2.0.2, 2.1, 3.0, 3.0.2, 3.1.1
Login
Kerberos in a domain, NTLM otherwise
Security
Signing; AES-GCM or AES-CCM encryption in SMB 3
Defined in
Microsoft open specification [MS-SMB2]

Defined in[MS-SMB2][MS-SMB][MS-NLMP]RFC 4120

Header fields

What SMB puts in its messages, with example values from the stories above.

SMB2

Protocol id
0xFE 'SMB'0xFE marks SMB2 and SMB3. Old SMB1 starts with 0xFF instead.
Command
NEGOTIATE (0x0000)
Status
STATUS_SUCCESS (0x00000000)
Flags
Response, SignedA signature over the whole message stops anyone in the middle from changing it.
Message id
0
Dialects
2.0.2, 2.1, 3.0, 3.0.2, 3.1.1The server will pick the highest one both sides know.
Encryption ciphers
AES-128-GCM, AES-128-CCM, AES-256-GCM, AES-256-CCM
Signing
AES-GMAC, AES-CMAC
Dialect
3.1.1 (0x0311)3.1.1 adds a check that the negotiation itself was not tampered with (pre-auth integrity).
Security blob
SPNEGO: Kerberos, NTLMThe login methods the server accepts.

SMB3 transform header

Protocol id
0xFD 'SMB'0xFD means an encrypted SMB3 message follows.
Signature
16-byte AES-GCM tagProves the encrypted message was not changed.
Nonce
unique per message
Session id
0x0000a40000000041
Inside (hidden)
CREATE salaries-2026.xlsxOnly the PC and the server can see this. Shown here for learning.

Captured

Seen by onlooker
0xFD 'SMB' and random-looking bytesWith a normal signed share the onlooker could read the spreadsheet.

Test yourself

Question 1 of 5Score 0

Which TCP port does modern SMB use?

Questions people ask

What port does SMB use?

TCP port 445. Very old networks also used ports 137 to 139 for NetBIOS. Never open 445 to the internet; use a VPN to reach shares from outside.

What is the difference between SMB and CIFS?

CIFS was the name for Microsoft's SMB1 dialect in the 1990s. Today people still say CIFS, but modern systems use SMB 2 and 3, which are quite different.

How do I check which SMB version I am using?

On Windows run Get-SmbConnection in PowerShell while a share is open and read the Dialect column. On macOS run smbutil statshares -a.

Is SMB secure?

SMB 3 with signing is safe on a trusted network, and turning on encryption protects data from anyone capturing traffic. SMB1 is not safe and should stay off.

Why can my old printer or scanner not save to a shared folder?

It probably only speaks SMB1, which modern Windows and NAS boxes refuse. Look for a firmware update that adds SMB2 or 3, or use scan to email instead.

Is SFTP or SMB better for sharing files?

SMB is best inside an office or home, where it works like a normal drive. SFTP is better across the internet, because it runs over SSH and is easy to secure.

Donate